1. Type of forklift bearing
Forklift bearing is a very important hardware part used in forklift. Forklift bearing plays an irreplaceable role in the work of forklift. The following small edit and you analyze the bearing type in the whole forklift accessories.
Forklift front axle chassis: hub bearing angular contact ball bearing or deep groove ball bearing, tapered roller bearing, suspension bearing thrust ball bearing, thrust needle bearing, steering gear bearing.
Forklift engine system: tensioner, idler bearing - ball bearing with seat, deep groove ball bearing, tapered roller bearing, clutch separation bearing - ball bearing, water pump bearing - double row roller bearing, etc.
Forklift gearbox system: needle bearing, tapered roller bearing.
Other parts (body, gantry): gantry bearing, side roller bearing, etc.
2. Forklift bearing use and installation precautions
1. Keep forklift bearings and their surroundings clean. Even if the invisible tiny dust enters the forklift bearing, it will increase the wear of the bearing of each system, or emit vibration and noise.
2. Installation precautions
When installing the forklift bearing, it is not allowed to punch the forklift bearing forcefully, to knock the forklift bearing directly with a hammer, and to transfer the pressure through the rolling element.
3. Use proper and accurate installation tools
Try to use special tools and try to avoid using cloth and staple fiber.
4. Prevent forklift bearing from rusting
When directly taking the forklift bearing by hand, we suggest that the sweat on the hands should be fully washed off and coated with high-quality mineral oil before operation. In rainy season and summer, special attention should be paid to rust prevention. However, under some special operating conditions, forklift bearings can obtain a longer life than the traditional calculation, especially in the case of light load. These special operating conditions are the surface damage that may occur when the rolling surface (track and rolling element) is effectively separated and limited by a lubricating oil film.